Tension and Stringing

TSE MODEL FODP-31 TRAILER MOUNTED FIBER OPTIC DRUM PULLER

BASIC UNIT DESCRIPTION

Performance
* Continuous torque rating of 31,000 in.-lbs.
* Full Drum linepull rating of 1,300 lbs.
* 0 - 3 miles per hour linespeed with infinite speed control and excellent inching ability

Reel
* Reel is 40" in diameter, 32-1/2 inches between flanges and 20" core diameter
* Reel has a capacity for 10,000 ft. of 1/2" or 18,000 ft. of 3/8" diameter pulling rope
* Free wheeling of reel with bronze disc brake and manual caliper on reel for controlling rope payout
* The reel shaft is mounted on replaceable ball bearings with grease fittings for smooth operation and long life
* Automatic, self reversing diamond lead screw levelwind, with a 20" diameter sheave and load cell
* Reel shaft is extended for the addition of a capstan type wheel

Hydraulic Reel Drive
* The reel drive incorporates a spring applied-hydraulic released holding brake rated at 150% of the maximum rated torque, The brake applies automatically in the event of loss of hydraulic pressure or engine shutdown
* Manual holding brake control
* Variable displacement hydraulic pump drive system with infinite speed and tension control
* Hydraulic oil cooler to ensure uniform heat dissipation
* 25 gallon hydraulic reservoir with oil level and temperature gauge and bottom drain port
Control Console
* The console is positioned in the center of the trailer's tongue for optimum operator visibility and safety. It includes:
- Permanently engraved panel
- Hydraulic pressure gauge
Reel direction and speed controller, Includes a positive stop between Pull in and Pay out setting
Adjustable linepull tension controller
Line pull gauge with fine adjustments control
* Operator's welded wire protective screen
* Deluxe, adjustable operator's seat and backrest

Engine
* 19 h.p. water-cooled Diesel engine with an 12 volt electric starter, keyed ignition, and throttle
* 12 gallon fuel tank with level gauge
* Lockable steel battery box
Trailer and Undercarriage
* Single axle with 6,000 lbs. capacity, spring leaf type 3,000 lbs., with electric brakes and a break away switch
* Two breakaway safety chains with hooks
* Tires are 8.75 X 16.5 "E"
* Standard highway lighting with a dual tail light system, one for turn light and one for brake light
* Reflective tape as required by NHTSA
* Heavy duty, crank type, drop leg mechanical tongue and pin type rear jacks.
* 3" pintle adjustable tow hitch
* The trailer frame and tongue is constructed of tubular steel and is fully welded
* Heavy duty checker plate fenders with mud flaps
* The unit is sandblasted, primed and painted with two coats of yellow enamel finish paint

Approximate Dimensions:
Length 14', Width 89", Height 6'-4 ", Weight with rope 5,800 lbs.

TOP

Web Designer: David Thornton