TIMBERLAND CUTTER
The heated and air conditioned sound abated cab provides a comfortable, quiet workplace for the operator.
The cab meets current SAE requirements for ROPS (Roll Over Protection Standards J 1040C) as well as FOPS (Falling Object Protection Standards J 231).
In addition, the machine has a Dielectric Package that includes:
Fiberglass upper boom and lower boom inserts and non wire braid hose. Meets ANSI A-92.2 and CSA C225 for under 69KV.
Rear cab emergency escape passage.
Joy Stick type controls allow fingertip movement of the trimming implement while sitting upright in a multi-adjustable seat.
CARRIER:
Steering wheel guided.
Conventional Powershift Transmission. No high pressure hydraulics are used to propel the carrier.
4-wheel drive with Diff-Lok axles to reduce site damage.
Maximum road speed to 18 mph.
Simple, medium pressure hydraulic system.
Standard tires 67 X 34 X 26
A rear mounted 30,000 lb. hydraulic controlled recovery winch with a heavy duty four roller entrance fairlead.
Equipped with 270' of 5/8" wire rope and a heavy duty hook. A mechanical disconnect is provided for freewheeling.
A six cylinder Cummins Diesel Engine model 6BT 5.9 provides quiet 4-cycle operation with very low fuel consumption.
CUTTING HEIGHT:
Model T-600 has 60 foot reach.
Model T-700 has 70 foot reach.
APPROXIMATE DIMENSIONS:
Height 10' 9-1/4" Width 10' 4" Length of T-600 machine is 31 feet, T-700 is 36 feet.
TOP
Web Designer: David Thornton
Mayo Auction All rights reserved.